Do you have an interesting product concept? Do you want to give shape to that idea and take it to production? If you are working on a new electronic product idea then the first step is to get your proof of concept. You need to establish that the idea that you have in your head is practically possible to construct. You must first build a PCB prototype, which will be your proof of concept.
What does it really to take to build a good PCB prototype? When you set on to build a PCB prototype, it is vital that you have enough patience until you get things right. When we are talking of building prototypes, we are talking about giving shape to something that is not yet in reality but just an idea in your head. You may not get everything correct right at the first attempt. You may need to go over several rounds of building and correcting what you have built until you get a stable PCB prototype that does what it is supposed to do.
You will need a good PCB fabrication company that is ready to work with you and help you build your prototype. Many PCB manufacturers may not be ready to work with you on prototype quantities. They work only with large volume orders and prototypes are manufactured only in small numbers until the prototype is perfected and ready to go to production. Invest enough time to identify the most dependable PCB manufacturers that will help you build your prototype and do it at an affordable cost.
If you work with an experienced PCB manufacturer, you are likely to get things done fast as they would be in a better position to guide you in terms of what is likely to work and what is not likely to work. They will help you minimize the number of rounds of iterations. This will help you in two ways. First, you will spend a lot lesser amount of money than what you would spend otherwise and secondly, you would spend a lot lesser time in building your prototype. You will be able to launch your product much faster with the help of an experienced PCB manufacturing company.
Thirdly, you must have in place stringent testing mechanism to test your PCB prototypes. If the prototypes are not tested under all possible extreme conditions, then your product will run into issues at the customers’ hands. You would not know under what conditions your customers would be using your products. You need to therefore be equipped for all possible extreme conditions.
Take your time to identify the best experts in town to take care of your PCB prototype building needs. As you are likely to be taking your prototype to large scale production. Look for a company that can handle large scale PCB production as well so that you are not required to deal with multiple companies to handle your requirements. \